El Presidente Posted March 11, 2021 Share Posted March 11, 2021 14 minutes ago, Mr. Japan said: Made in Italy? where? Oreste Frati srl Via La Mola, 4, 33085 Molino di Campagna PN, Italy Massimo and the team were an absolute pleasure to deal with. 1 Link to comment Share on other sites More sharing options...
Popular Post MoeFOH Posted March 11, 2021 Popular Post Share Posted March 11, 2021 Here's the little vid and text guide from Massimo on sharpening the Figaro... You can use a sharpening stone. You can easily sharpening the cutters without dismantling but it's easy to unscrew the two parts. Before sharpening the cutter place the sharpening stone in water about 5 to 10 minutes until it is completely wet and put the whetstone on a damp cloth. Keep the blade at an angle of 10 to 15 degrees on the whetstone. Apply a bit pressure when you grind the blade forward and release the pressure when you grind the blade backward Continue sharpening one side until burns starts to appear on the edge and then sharpen the other side same time. The water on the whetstone gets muddy during sharpening. Do not wash the muddy as it helps a knife sharpened. 20201126_095837.mp4 1 4 Link to comment Share on other sites More sharing options...
El Presidente Posted March 11, 2021 Share Posted March 11, 2021 Thanks Steve Link to comment Share on other sites More sharing options...
unclepauly25 Posted March 12, 2021 Share Posted March 12, 2021 On 3/10/2021 at 6:30 PM, Smatthews607 said: About a week for me. Not bad for crossing the Atlantic and moving through New York's facility. Thank you, definitely going to order one ! I ordered mine this morning! I’ve wanted one of these for a while, I was sold once I saw the bond roberts logo! 2 Link to comment Share on other sites More sharing options...
BeerPimp Posted March 14, 2021 Share Posted March 14, 2021 Once again this place is costing me more money. I have been meaning to purchase a new cutter and then I saw this thread. Ordered one can't wait to get it. 2 Link to comment Share on other sites More sharing options...
BigGuns Posted March 14, 2021 Share Posted March 14, 2021 Used it a few times now...I love it. Super sharp and ergonomic. Now if only I can get my ish together and make a straight cut! Link to comment Share on other sites More sharing options...
Meklown Posted March 14, 2021 Share Posted March 14, 2021 On 3/12/2021 at 6:07 AM, MoeFOH said: Here's the little vid and text guide from Massimo on sharpening the Figaro... Okay I'm sold. Place an order already. Been eyeing the cutter since I saw it on this forum in an earlier post/discussion re Fox, but didn't find any shops that ships to HK. Hopefully if this sharpens as advertised, this will be the last cutter I need to buy, though need and want are two different concepts altogether. Link to comment Share on other sites More sharing options...
Joeyjojo Posted March 16, 2021 Share Posted March 16, 2021 Got mine today and used it as soon as finished work. Really clean cut, and fantastic value for money compared with some of the other more gimmicky knife style cutters out there. Link to comment Share on other sites More sharing options...
bassistheplace Posted March 16, 2021 Share Posted March 16, 2021 just ordered 2. i love this community Link to comment Share on other sites More sharing options...
BeerPimp Posted March 25, 2021 Share Posted March 25, 2021 Got mine yesterday. I was super impressed with the finish and craftsmanship. Had to test it out right away. It is definitely sharp. Also I will say the way that it was designed was well thought out. You can really see what you are doing compared to my Xikar cutter. 1 Link to comment Share on other sites More sharing options...
unclepauly25 Posted March 25, 2021 Share Posted March 25, 2021 Got mine Monday! Very high quality and sharp, love it! 3 Link to comment Share on other sites More sharing options...
Habana Mike Posted March 26, 2021 Share Posted March 26, 2021 Very nice cutter. Slices just the cap off perfectly with the right technique. Takes a little practice, a good eye and a little sobriety. Surprised no fez monkey logo though! Foxy got the fox 3 Link to comment Share on other sites More sharing options...
La_Tigre Posted March 31, 2021 Share Posted March 31, 2021 Not the cutter to be used on the second cigar of the night.... 🩸 🩸 🩸 😉 ***Edit: Just saying! Cannot stop tinkering with it! 2 Link to comment Share on other sites More sharing options...
El Presidente Posted April 1, 2021 Share Posted April 1, 2021 On 3/27/2021 at 9:45 AM, Habana Mike said: Very nice cutter. Slices just the cap off perfectly with the right technique. Takes a little practice, a good eye and a little sobriety. Surprised no fez monkey logo though! Foxy got the fox maybe a Fez Monkey a little later in the year 1 Link to comment Share on other sites More sharing options...
mprach024 Posted April 1, 2021 Share Posted April 1, 2021 4 hours ago, El Presidente said: maybe a Fez Monkey a little later in the year When that happens I’ll place my order Link to comment Share on other sites More sharing options...
La_Tigre Posted April 1, 2021 Share Posted April 1, 2021 51 minutes ago, mprach024 said: When that happens I’ll place my order One for each hand... 😂 2 Link to comment Share on other sites More sharing options...
Corylax18 Posted April 1, 2021 Share Posted April 1, 2021 12 hours ago, El Presidente said: maybe a Fez Monkey a little later in the year Damn. I wish I'd known. I would have waited, ordered the set and saved on shipping! Haha Link to comment Share on other sites More sharing options...
La_Tigre Posted April 2, 2021 Share Posted April 2, 2021 On 3/31/2021 at 7:36 PM, El Presidente said: maybe a Fez Monkey a little later in the year Would love for this version to be the Damascus steel. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now